How to Install Windows 7 From PEN FLASH DRIVE USB PD

In this post i will tell you how
to install windows 7 or any
other Version via Pen Usb
Drives.
I have found a much easier
way to install
Windows 7 from a USB Flash
drive. Unlike other methods
where you have to write
complicated
commands, this method can be
completed even by those who
have very little computer
background.
The whole process takes only
two steps, run
UNetbootin, load the Windows 7
ISO file, and
finally restart your
computer.Also See how to
INCREASE CAPACITY OF MEMORY
CARD/PENDRIVES WITH SCREEN
SHOTS
Before you begin, you will
require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin

http://unetbootin.sourceforge.net/

Note: If UNetbootin
doesn’t work, try out
the
Microsoft’s official
tool called Windows 7
USB/ DVD Tool.
Now insert the USB drive, run
UNetbootin, and
select Disk Image as ISO.
Browse your local drive
for Windows 7 ISO that you
downloaded and
click Open. Now Select Type as
USB and choose
the drive. Once done, it will
look like a bit similar
to the screenshot shown
below.
Click OK and it will begin
extracting all installation files
to the USB drive. The whole
process will take some time
(10-15 minutes), so have
patience.
Once the installation is
complete, reboot your
computer. Now while your
system is starting up
press the appropriate button
(usually F1, F2, F12,
ESC, Backspace, or Escape) to
bring up Bios Boot
Menu. Change the startup
order to boot USB by
default, usually you will have
to press F6 to move the
selected USB device on top.
Once done, save
changes and restart the
system.
Windows 7 Installation Screen